Removing/Inserting the Main Filter

The main filter (20) is a HEPA pleated filter with extremely high filtration performance for cleaning exhaust air. You need to remove the main filter from the container if you intend to carry out wet vacuuming.

Removing the Main Filter (see figure E1)

Open the catches (9) and remove the top part of the vacuum cleaner (10) (see figure C).

Turn the filter holder (29) as far as possible in the direction of rotation and take the filter holder, together with the main filter (20), out of the top part of the vacuum cleaner (10).

Inserting the Main Filter (see figure E2)

Place the filter holder (29), together with the main filter (20), over the filter basket (30) and turn the filter holder (29) as far as possible in the direction of rotation .

Put the top part of the vacuum cleaner (10) on and close the catches (9).

Note: Ensure that the filter is always fitted correctly. This is particularly important when vacuuming hazardous dust.