Safety information for cordless worklights

Read all the safety information and instructions. Failure to observe the safety information and follow instructions may result in electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference.

• Remove the batteries from the worklight before carrying out any work on the worklight (e.g. assembly, maintenance, etc.) as well as when transporting and storing the worklight. There is risk of injury from unintentionally pressing the on/off switch.

• Do not direct the light beam at persons or animals and do not stare into the light beam yourself (even from a distance).

• Do not use the worklight in road traffic. The worklight is not permitted for illumination in road traffic.

Keep the minimum distance between the cordless worklight and all illuminated surfaces and objects. Illuminated objects may overheat if this distance is not maintained.

• Do not cover the lamp head while the cordless worklight is operating. The lamp head warms up during operation and can cause burns if this heat accumulates.

• In case of damage and improper use of the battery, vapours may be emitted. The battery can set alight or explode. Ensure the area is well ventilated and seek medical attention should you experience any adverse effects. The vapours may irritate the respiratory system.

• If used incorrectly or if the battery is damaged, flammable liquid may be ejected from the battery. Contact with this liquid should be avoided. If contact accidentally occurs, rinse off with water. If the liquid comes into contact with your eyes, seek additional medical attention. Liquid ejected from the battery may cause irritation or burns.

• The battery can be damaged by pointed objects such as nails or screwdrivers or by force applied externally. An internal short circuit may occur, causing the battery to burn, smoke, explode or overheat.

• When the battery is not in use, keep it away from paper clips, coins, keys, nails, screws or other small metal objects that could make a connection from one terminal to another. A short circuit between the battery terminals may cause burns or a fire.

• Do not open the battery. There is a risk of short-circuiting.

• Only charge the batteries using chargers recommended by the manufacturer. A charger that is suitable for one type of battery may pose a fire risk when used with a different battery.

• Only use the battery in the manufacturer's products. This is the only way in which you can protect the battery against dangerous overload.

• Coin cells must never be swallowed or inserted into any other part of the body. If you suspect that someone has swallowed a coin cell or that a coin cell has entered the body in another way, seek medical attention immediately. Swallowing coin cells can result in severe internal burns and death within 2 hours.

• Ensure that coin cell replacement is carried out properly. There is a risk of explosion.

• Only use the coin cells listed in this operating manual. Do not use any other coin cells or other forms of electrical power supply.

• Do not attempt to recharge the coin cell and do not short circuit the coin cell. The coin cell may leak, explode, catch fire and cause personal injury.

• Remove and dispose of drained coin cell correctly. Drained coin cell may leak and damage the product or cause personal injury.

• Do not overheat the coin cell or throw it into fire. The coin cell may leak, explode, catch fire and cause personal injury.

• Do not damage the coin cell and take the coin cell apart. The coin cell may leak, explode, catch fire and cause personal injury.

• Do not allow damaged coin cells to come into contact with water. Leaking lithium may mix with water to create hydrogen, which could cause a fire, an explosion, or personal injury.

• Stop using the worklight if the battery compartment cover no longer closes; remove the coin cell and have the worklight repaired.

• Ensure the cordless worklight is not operated via Bluetooth® unintentionally and/or without permission. Assign a PIN via the Bosch application.

• The cordless worklight features a wireless interface. Local operating restrictions, e.g. in aeroplanes or hospitals, must be observed.

• Deactivate the wireless interface, e.g. for transport. To switch off the wireless interface, remove the coin cell and battery.

• Before switching on the cordless worklight using the Bosch application, ensure that you have visual contact with the cordless worklight and that you have taken all safety precautions.

• Avoid dust accumulation at the workplace. Dust can easily ignite.

• Store idle cordless worklights out of the reach of children. Do not allow persons unfamiliar with the cordless worklight or these instructions to operate the tool. Cordless worklights can be dangerous in the hands of untrained users.